Home >>Products >>Angular contact ball bearing >>Technology Guide >> Sealing solutions for single row angular contact ball bearin
Technology Guide

Sealing solutions for single row angular contact ball bearin

Back

Nouxinde supplies some of single row angular contact ball bearings in the 72B (suffix 2RS) and 73B (suffix 2RS) series sealed on both sides.

Bearings sealed on both sides are lubricated for the life of the bearing and should not be washed or relubricated. The bearings are considered virtually maintenance-free. If they are to be hot mounted, Nouxinde does not recommend heating capped bearings above 80°C. Howerver, if higher temperatures are necessary make sure that the temperature does not exceed the permissible temperature of either the seal or grease. whichever is lowest. During start up, grease may leak at the inner ring. For bearing arrangements where this would be detrimental, special design steps must be undertaken.

Preview: no | Next: no
Related products
Related bearing numbers
7200BJ
Brand:DXO
Angular contact ball bearings
7200BM
Brand:DXO
Angular contact ball bearings
7200BP
Brand:DXO
Angular contact ball bearings
7201BJ
Brand:DXO
Angular contact ball bearings
7201BP
Brand:DXO
Angular contact ball bearings
7202BJ
Brand:DXO
Angular contact ball bearings
7202BP
Brand:DXO
Angular contact ball bearings
7203BJ
Brand:DXO
Angular contact ball bearings
7203BM
Brand:DXO
Angular contact ball bearings
7203BP
Brand:DXO
Angular contact ball bearings
7204BJ
Brand:DXO
Angular contact ball bearings
Terms & Conditions | Privacy Policy | Contact Us | Nodes bearings | SKF bearings | FAG bearings